air_quality_index |
Colormap designed for air_quality_index:idx parameters. |
 |
blue_magenta |
Colormap with customed markings for precipitation. The inverted version is magenta_blue without customed markers. |
 |
blue_to_red |
Colormap with fixed parameter dependent scaling. Also exists as an inverted version called red_to_blue. |
 |
blues |
Colormap with fixed parameter dependent scaling, where the smallest value corresponds to white and the largest to blue. An inverted colormap blues_inverted is available. |
 |
blues_inverted |
Inversion of blues, where the largest value corresponds to white and the smallest to blue. |
 |
cape |
Designed for the convective available potential energy cape:Jkg parameter. |
 |
ceiling_height_airmet |
Designed for ceiling_height_agl:<unit> parameter for AIRMET with transparency for higher values. |
 |
ceiling_height_segmented |
Designed for ceiling_height_agl:<unit> parameter. |
 |
cin_segmented |
Designed for cin:Jkg parameter. |
 |
cloud_type |
Segmented colormap specifically created to display different cloud types. |
 |
dust_concentration |
Segmented colormap to use for dust concentration parameters. |
 |
dust_density |
Segmented colormap to use for dust density parameters. |
 |
dwd_radar_5min |
Segmented colormap intended to be used for DWD radar data. |
 |
dwd_warnings |
Segmented colormap intended to be used for warn parameters. It is based on a colormap for warnings from DWD. |
 |
fresh_snow_long_interval |
Segmented colormap specifically designed for the fresh_snow_<interval>:cm parameter during long accumulation intervals. |
 |
fresh_snow_short_interval |
Segmented colormap specifically designed for the fresh_snow_<interval>:cm parameter during short accumulation intervals. |
 |
gray |
Colormap with fixed parameter-dependent scaling, where the smallest value corresponds to black and the largest to white. An inverted colormap gray_inverted is available. |
 |
gray_inverted |
Inversion of gray, where the largest value corresponds to black and the smallest to white. |
 |
gray_transparent |
Grayscale from transparent to white. |
 |
gray_transparent_dark |
Grayscale from transparent to gray. |
 |
greens_shifted |
Colormap with fixed parameter dependent scaling, where the smallest value corresponds to white and the largest to green. |
 |
heavy_rain_warning_europe_segmented / incessant_rain_warning_europe_segmented |
Segmented colormap from transparent to red, intended to be used for heavy rain warnings or incessant rain warnings over Europe. |
 |
jet |
Colormap with fixed parameter-dependent scaling that goes from blue to red with green in between. An inverted version jet_inverted is available. |
 |
jet_inverted |
Inversion of jet, where the smallest values correspond to red and the largest to blue. |
 |
jet_segmented |
A segmented version of jet with 40 steps. |
 |
jet_segmented_inverted |
Inversion of jet_segmented. |
 |
jetstream |
Adapted version of jet with transparency for low values. |
 |
land_usage |
Colormap intended to be used for the land_usage:idx parameter. |
 |
lifted_index_global |
A colormap specifically created to display the subtle changes of the lifted index on a global scale. |
 |
lifted_index_global_segmented |
A segmented version of lifted_index_global. |
 |
lightning_europe_transparent |
Yellow scale from transparent to yellow. |
 |
magenta_blue |
Inversion of blue_magenta, where small values correspond to magenta and large values to blue. |
 |
msg_h03b / msg_h60b |
Colormap used for Eumetsat Multi-Sensor Precipitation estimate data. |
 |
negative_cold_index_segmented |
Colormap intended to be used for the cold_index:idx parameter. |
 |
negative_index_segmented |
Segmented colormap from green to red, intended to be used for parameters where higher values correspond to more problematic/dangerous conditions. |
 |
periodic |
Periodic colormap with fixed parameter dependent scaling. Best used for periodic quantities like directions. An inverted version periodic_inverted is available. |
 |
periodic_inverted |
Inversion of periodic. |
 |
plasma |
Colormap with fixed parameter dependent scaling that goes from purple to yellow. An inverted version plasma_invertedis available. |
 |
plasma_inverted |
Inversion of plasma, where the smallest values correspond to yellow and the largerst to purple. |
 |
pollen_grains_large |
Colormap designed for displaying large pollen grains. |
 |
pollen_grains_medium |
Colormap designed for displaying medium pollen grains. |
 |
pollen_grains_small |
Colormap designed for displaying small pollen grains. |
 |
pollen_europe_segmented |
Colormap designed for displaying pollen data. |
 |
pollen_segmented |
Colormap designed for displaying pollen data. |
 |
positive_index_segmented |
Segmented colormap from transparent to orange and green, designed for parameters where higher values mean more favourable conditions. |
 |
precip_day_europe_segmented |
Segmented colormap intended to be used for displaying number of precipitation days in Europe. |
 |
precip_europe / precip_europe_segmented |
Colormap developed for displaying precipitation across Europe. |
 |
precip_layer_europe_segmented |
Segmented colormap specifically developed for displaying different precipitation types and their intensity over Europe. |
 |
precip_segmented |
Segmented colormap specifically developed for displaying precipitation. |
 |
precip_type_intensity_europe_segmented |
Segmented colormap specifically developed for displaying different precipitation types and their intensity over Europe. |
 |
precip_type_intensity_segmented |
Segmented colormap specifically developed for displaying different precipitation types and their intensity. |
 |
precip_type_segmented |
Segmented colormap specifically developed for displaying different precipitation types. |
 |
precip_type_europe_segmented |
Segmented colormap specifically developed for displaying different precipitation types over Europe. |
 |
precip_usa_segmented |
Colormap with fixed parameter dependent logarithmic scaling, developed for displaying precipitation according to US standards. |
 |
prism |
Colormap with fixed parameter dependent scaling, but without a one-to-one correspondence between values and colors. An inverted version prism_inverted is available. |
 |
prism_inverted |
Inversion of prism. |
 |
radar_log |
Colormap with fixed parameter dependent logarithmic scaling, developed for displaying precipitation. |
 |
radar_segmented |
An alternative to display precipitation. |
 |
red_to_blue |
Inversion of blue_to_red, where small values correspond to red and large to blue. |
 |
red_yellow_green |
An inverted traffic light, useful e.g. for visibility where lower values correspond to more problematic situations. |
 |
reds |
Colormap with fixed parameter dependent scaling, where the smallest value corresponds to white and the largest to red. An inverted version reds_inverted is available. |
 |
reds_inverted |
Inversion of reds, where small values correspond to red and large to white. |
 |
satellite_ir_clouds |
Designed for the satellite brightness temperature from orange to gray and with transparency for higher temperatures (the land surface tends to be transparent with this colormap). |
 |
satellite_ir_clouds_greys |
Designed for the satellite brightness temperature from white to black and with transparency for higher temperatures (the land surface tends to be transparent with this colormap). |
 |
satellite_ir_colored |
Designed for displaying IR satellite data in color. |
 |
satellite_ir_water_vapor |
Designed for displaying IR satellite water vapor for the sat_ir_062:C parameter, where green corresponds to wet/cold and red and orange correspond to dry/warm. |
 |
satellite_ndvi |
Designed for the sat_ndvi:idx parameter (normalised difference vegetation index). |
 |
seismic |
Colormap with fixed parameter dependent scaling, similar to blue_to_red but with stronger colors. An inverted version seismic_inverted is available. |
 |
seismic_inverted |
Inversion of seismic, where small values correspond to red and large to blue. |
 |
snow_depth |
Segmented colormap specifically designed for the parameter snow_depth:<unit>. |
 |
storm_warning |
Segmented colormap intended to be used for storm warnings. |
 |
sunshine_europe_segmented |
Segmented colormap intended to be used for sunshine_duration_<interval>:<unit> parameter in Europe. |
 |
surface_wind_speed_airmet |
Colormap for surface wind_speed_<level>:<unit> for AIRMET with transparency for low values. |
 |
t_europe |
Colormap with fixed parameter dependent scaling developed to display temperatures in mid-lattitude areas throughout the whole year in pleasant colors. |
 |
t_europe_segmented |
A segmented colormap to display temperatures in mid-lattitude areas throughout the whole year in pleasant colors. |
 |
t_global |
Colormap with fixed parameter dependent scaling developed to display temperature on the whole globe throughout the whole year, focussing on subtle changes. |
 |
t_global_segmented |
A segmented version of t_global. |
 |
theta_e_global |
Colormap designed for theta_e_<level>:<unit>. |
 |
theta_e_global_segmented |
Segmented version of theta_e_global. |
 |
traffic_light |
From red to green, best suited for warning parameters where low values correspond to higher risks. |
 |
traffic_light_inverted |
From green to red, best suited for warning parameters where high values correspond to higher risks. |
 |
tstorm_warning |
Segmented colormap from transparent to red, intended to be used for thunderstorm warnings tstorm_warning_<interval>:idx. |
 |
tstorm_warning_europe_segmented |
Segmented colormap from transparent to red, intended to be used for thunderstorm warnings tstorm_warning_<interval>:idx over Europe. |
 |
turbulence_ellrod3_segmented |
Non-linear segmented colormap from transparent to green and red, intended to be used for turbulence_ellrod_<level>:s2. |
 |
turbulence_segmented |
Non-linear segmented colormap from blue to red, intended to be used for richardson_number_<level>:idx. |
 |
turbulence_segmented_inverted |
Inverted version of turbulence_segmented. |
 |
uv_index_europe_segmented |
Colormap with transparency for small values, desinged for displaying the UV index uv:idx. |
 |
viridis |
Colormap with fixed parameter-dependent scaling, where the smallest value corresponds to blue and the largest value to yellow. An inverted version viridis_inverted is available. |
 |
viridis_inverted |
Inversion of viridis, where the largest value corresponds to blue and the smallest value to yellow. |
 |
visibility_airmet |
Designed for the visibility:<unit> parameter for AIRMET with transparency for high values. |
 |
visibility_segmented |
Designed for the visibility:m parameter with transparency for high values. |
 |
vorticity_segmented |
Segmented colormap based on typical colormaps for vorticity, with saturated colors for higher values and faded colors for lower values. |
 |
wave_height_segmented |
Segmented colormap from blue to red, developed for displaying wave heights. |
 |
wind_gusts_europe_segmented |
Segmented colormap with transparency for low values, intended to be used for displaying wind gusts wind_gusts_<level>_<interval>:<unit> over Europe. |
 |
wind_shear_airmet |
Segmented colormap for wind_shear_<lower_level>_<upper_level>:<unit> for AIRMET with transparency for low values. |
 |
wind_speed_europe_segmented |
Segmented colormap with transparency for low values, intended to be used for displaying wind speeds wind_speed_<level>:<unit> over Europe. |
 |
wind_warning_europe_segmented |
Segmented colormap from transparent to red, intended to be used for wind_warning_<interval>:idx over Europe. |
 |
